Source code for zhmcclient._cpc

# Copyright 2016-2021 IBM Corp. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""
A :term:`CPC` (Central Processor Complex) is a physical IBM Z or LinuxONE
computer.

A particular HMC can manage multiple CPCs and can discover other CPCs that
are not managed by that HMC. Such other CPCs are called "unmanaged CPCs" and
they may or may not be managed by another HMC.

This section describes the interface for *managed* CPCs using resource class
:class:`~zhmcclient.Cpc` and the corresponding manager class
:class:`~zhmcclient.CpcManager`.

The HMC can manage a range of old and new CPC generations. Some older CPC
generations are not capable of supporting the HMC Web Services API; these older
CPCs can be managed using the GUI of the HMC, but not through its Web Services
API. Therefore, such older CPCs will not be exposed at the HMC Web Services
API, and thus will not show up in the API of this Python package.

TODO: List earliest CPC generation that supports the HMC Web Services API.

A CPC can be in any of the following three modes:

- DPM mode: Dynamic Partition Manager is enabled for the CPC.
- Classic mode: The CPC does not have Dynamic Partition Manager enabled,
  and is not member of an ensemble.
- Ensemble mode: The CPC is member of an ensemble. This Python client
  does not support the functionality that is specific to ensemble mode.

The functionality supported at the HMC API and thus also for users of this
Python client, depends on the mode in which the CPC currently is. If a
particular functionality is available only in a specific mode, that is
indicated in the description of the functionality.
"""

from __future__ import absolute_import

import warnings
import copy

from ._manager import BaseManager
from ._resource import BaseResource
from ._lpar import LparManager
from ._partition import PartitionManager
from ._activation_profile import ActivationProfileManager
from ._adapter import AdapterManager
from ._virtual_switch import VirtualSwitchManager
from ._capacity_group import CapacityGroupManager
from ._logging import logged_api_call
from ._exceptions import ParseError
from ._utils import matches_filters, divide_filter_args

__all__ = ['CpcManager', 'Cpc']


[docs]class CpcManager(BaseManager): """ Manager providing access to the managed :term:`CPCs <CPC>` exposed by the HMC this client is connected to. Derived from :class:`~zhmcclient.BaseManager`; see there for common methods and attributes. Objects of this class are not directly created by the user; they are accessible via the following instance variable of a :class:`~zhmcclient.Client` object: * :attr:`~zhmcclient.Client.cpcs` """ def __init__(self, client): # This function should not go into the docs. # Parameters: # client (:class:`~zhmcclient.Client`): # Client object for the HMC to be used. # Resource properties that are supported as filter query parameters # (for server-side filtering). query_props = [ 'name', ] super(CpcManager, self).__init__( resource_class=Cpc, class_name='cpc', session=client.session, parent=None, base_uri='/api/cpcs', oid_prop='object-id', uri_prop='object-uri', name_prop='name', query_props=query_props) self._client = client @property def client(self): """ :class:`~zhmcclient.Client`: The client defining the scope for this manager. """ return self._client @property def console(self): """ :class:`~zhmcclient.Console`: The :term:`Console` representing the HMC this CPC is managed by. The returned object is cached, so it is looked up only upon first access to this property. The returned object has only the following properties set: * 'object-uri' Use :meth:`~zhmcclient.BaseResource.get_property` or :meth:`~zhmcclient.BaseResource.prop` to access any properties regardless of whether they are already set or first need to be retrieved. """ return self.client.consoles.console
[docs] @logged_api_call def list(self, full_properties=False, filter_args=None): """ List the CPCs managed by the HMC this client is connected to. Authorization requirements: * Object-access permission to any CPC to be included in the result. Parameters: full_properties (bool): Controls whether the full set of resource properties should be retrieved, vs. only the short set as returned by the list operation. filter_args (dict): Filter arguments that narrow the list of returned resources to those that match the specified filter arguments. For details, see :ref:`Filtering`. `None` causes no filtering to happen, i.e. all resources are returned. Returns: : A list of :class:`~zhmcclient.Cpc` objects. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ resource_obj_list = [] resource_obj = self._try_optimized_lookup(filter_args) if resource_obj: resource_obj_list.append(resource_obj) # It already has full properties else: query_parms, client_filters = divide_filter_args( self._query_props, filter_args) resources_name = 'cpcs' uri = '/api/{}{}'.format(resources_name, query_parms) result = self.session.get(uri) if result: props_list = result[resources_name] for props in props_list: resource_obj = self.resource_class( manager=self, uri=props[self._uri_prop], name=props.get(self._name_prop, None), properties=props) if matches_filters(resource_obj, client_filters): resource_obj_list.append(resource_obj) if full_properties: resource_obj.pull_full_properties() self._name_uri_cache.update_from(resource_obj_list) return resource_obj_list
[docs]class Cpc(BaseResource): """ Representation of a managed :term:`CPC`. Derived from :class:`~zhmcclient.BaseResource`; see there for common methods and attributes. Objects of this class are not directly created by the user; they are returned from creation or list functions on their manager object (in this case, :class:`~zhmcclient.CpcManager`). """ def __init__(self, manager, uri, name=None, properties=None): # This function should not go into the docs. # manager (:class:`~zhmcclient.CpcManager`): # Manager object for this resource object. # uri (string): # Canonical URI path of the resource. # name (string): # Name of the resource. # properties (dict): # Properties to be set for this resource object. May be `None` or # empty. assert isinstance(manager, CpcManager), \ "Cpc init: Expected manager type %s, got %s" % \ (CpcManager, type(manager)) super(Cpc, self).__init__(manager, uri, name, properties) # The manager objects for child resources (with lazy initialization): self._lpars = None self._partitions = None self._adapters = None self._virtual_switches = None self._capacity_groups = None self._reset_activation_profiles = None self._image_activation_profiles = None self._load_activation_profiles = None @property def lpars(self): """ :class:`~zhmcclient.LparManager`: Access to the :term:`LPARs <LPAR>` in this CPC. """ # We do here some lazy loading. if not self._lpars: self._lpars = LparManager(self) return self._lpars @property def partitions(self): """ :class:`~zhmcclient.PartitionManager`: Access to the :term:`Partitions <Partition>` in this CPC. """ # We do here some lazy loading. if not self._partitions: self._partitions = PartitionManager(self) return self._partitions @property def adapters(self): """ :class:`~zhmcclient.AdapterManager`: Access to the :term:`Adapters <Adapter>` in this CPC. """ # We do here some lazy loading. if not self._adapters: self._adapters = AdapterManager(self) return self._adapters @property def virtual_switches(self): """ :class:`~zhmcclient.VirtualSwitchManager`: Access to the :term:`Virtual Switches <Virtual Switch>` in this CPC. """ # We do here some lazy loading. if not self._virtual_switches: self._virtual_switches = VirtualSwitchManager(self) return self._virtual_switches @property def capacity_groups(self): """ :class:`~zhmcclient.CapacityGroupManager`: Access to the :term:`Capacity Groups <Capacity Group>` in this CPC. """ # We do here some lazy loading. if not self._capacity_groups: self._capacity_groups = CapacityGroupManager(self) return self._capacity_groups @property def vswitches(self): """ :class:`~zhmcclient.VirtualSwitchManager`: Access to the :term:`Virtual Switches <Virtual Switch>` in this CPC. **Deprecated:** This attribute is deprecated and using it will cause a :exc:`~py:exceptions.DeprecationWarning` to be issued. Use :attr:`~zhmcclient.Cpc.virtual_switches` instead. """ warnings.warn( "Use of the vswitches attribute on zhmcclient.Cpc objects is " "deprecated; use the virtual_switches attribute instead", DeprecationWarning) return self.virtual_switches @property def reset_activation_profiles(self): """ :class:`~zhmcclient.ActivationProfileManager`: Access to the :term:`Reset Activation Profiles <Reset Activation Profile>` in this CPC. """ # We do here some lazy loading. if not self._reset_activation_profiles: self._reset_activation_profiles = \ ActivationProfileManager(self, profile_type='reset') return self._reset_activation_profiles @property def image_activation_profiles(self): """ :class:`~zhmcclient.ActivationProfileManager`: Access to the :term:`Image Activation Profiles <Image Activation Profile>` in this CPC. """ # We do here some lazy loading. if not self._image_activation_profiles: self._image_activation_profiles = \ ActivationProfileManager(self, profile_type='image') return self._image_activation_profiles @property def load_activation_profiles(self): """ :class:`~zhmcclient.ActivationProfileManager`: Access to the :term:`Load Activation Profiles <load Activation Profile>` in this CPC. """ # We do here some lazy loading. if not self._load_activation_profiles: self._load_activation_profiles = \ ActivationProfileManager(self, profile_type='load') return self._load_activation_profiles @property @logged_api_call def dpm_enabled(self): """ bool: Indicates whether this CPC is currently in DPM mode (Dynamic Partition Manager mode). If the CPC is not currently in DPM mode, or if the CPC does not support DPM mode (i.e. before z13), `False` is returned. Authorization requirements: * Object-access permission to this CPC. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ return self.prop('dpm-enabled', False) # Note: From HMC API version 2.24 on (i.e. starting with 8561), the Cpc # object supports a 'maximum-partitions' property, but only in DPM mode. # Therefore, we need to continue maintaining max partitions for all future # machine types. # Machine types with same max partitions for all models: _MAX_PARTITIONS_BY_MACHINE_TYPE = { '2817': 60, # z196 '2818': 30, # z114 '2827': 60, # zEC12 '2828': 30, # zBC12 '2964': 85, # z13 / Emperor '2965': 40, # z13s / Rockhopper '3906': 85, # z14 / Emperor II '3907': 40, # z14-ZR1 / Rockhopper II } # Machine types with different max partitions across their models: _MAX_PARTITIONS_BY_MACHINE_TYPE_MODEL = { ('8561', 'T01'): 85, # z15 ('8561', 'LT1'): 85, # z15 ('8562', 'GT2'): 85, # z15 (85 is an exception for 8562) ('8562', 'T02'): 40, # z15 ('8562', 'LT2'): 40, # z15 } @property @logged_api_call def maximum_active_partitions(self): """ Integer: The maximum number of active logical partitions or partitions of this CPC. The following table shows the maximum number of active logical partitions or partitions by machine generations supported at the HMC API: ========================= ================== Machine generation Maximum partitions ========================= ================== z196 60 z114 30 zEC12 60 zBC12 30 z13 / Emperor 85 z13s / Rockhopper 40 z14 / Emperor II 85 z14-ZR1 / -LR1 40 z15-T01 / -LT1 / -GT2 85 z15-T02 / -LT2 40 ========================= ================== Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`ValueError`: Unknown machine type """ machine_type = self.get_property('machine-type') machine_model = self.get_property('machine-model') try: return self._MAX_PARTITIONS_BY_MACHINE_TYPE[machine_type] except KeyError: pass try: return self._MAX_PARTITIONS_BY_MACHINE_TYPE_MODEL[ (machine_type, machine_model)] except KeyError: pass try: return self.get_property('maximum-partitions') except KeyError: new_exc = ValueError("Unknown machine type/model: {}-{}". format(machine_type, machine_model)) new_exc.__cause__ = None raise new_exc # ValueError
[docs] @logged_api_call def feature_enabled(self, feature_name): """ Indicates whether the specified feature is enabled for this CPC. The HMC must generally support features, and the specified feature must be available for the CPC. For a list of available features, see section "Features" in the :term:`HMC API`, or use the :meth:`feature_info` method. Authorization requirements: * Object-access permission to this CPC. Parameters: feature_name (:term:`string`): The name of the feature. Returns: bool: `True` if the feature is enabled, or `False` if the feature is disabled (but available). Raises: :exc:`ValueError`: Features are not supported on the HMC. :exc:`ValueError`: The specified feature is not available for the CPC. :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ feature_list = self.prop('available-features-list', None) if feature_list is None: raise ValueError("Firmware features are not supported on CPC %s" % self.name) for feature in feature_list: if feature['name'] == feature_name: break else: raise ValueError("Firmware feature %s is not available on CPC %s" % (feature_name, self.name)) return feature['state'] # pylint: disable=undefined-loop-variable
[docs] @logged_api_call def feature_info(self): """ Returns information about the features available for this CPC. Authorization requirements: * Object-access permission to this CPC. Returns: :term:`iterable`: An iterable where each item represents one feature that is available for this CPC. Each item is a dictionary with the following items: * `name` (:term:`unicode string`): Name of the feature. * `description` (:term:`unicode string`): Short description of the feature. * `state` (bool): Enablement state of the feature (`True` if the enabled, `False` if disabled). Raises: :exc:`ValueError`: Features are not supported on the HMC. :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ feature_list = self.prop('available-features-list', None) if feature_list is None: raise ValueError("Firmware features are not supported on CPC %s" % self.name) return feature_list
[docs] @logged_api_call def update_properties(self, properties): """ Update writeable properties of this CPC. This method serializes with other methods that access or change properties on the same Python object. Authorization requirements: * Object-access permission to this CPC. * Task permission for the "CPC Details" task. Parameters: properties (dict): New values for the properties to be updated. Properties not to be updated are omitted. Allowable properties are the properties with qualifier (w) in section 'Data model' in section 'CPC' in the :term:`HMC API` book. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ # pylint: disable=protected-access self.manager.session.post(self.uri, body=properties) # Attempts to change the 'name' property will be rejected by the HMC, # so we don't need to update the name-to-URI cache. assert self.manager._name_prop not in properties self.update_properties_local(copy.deepcopy(properties))
[docs] @logged_api_call def start(self, wait_for_completion=True, operation_timeout=None): """ Start this CPC, using the HMC operation "Start CPC". Authorization requirements: * Object-access permission to this CPC. * Task permission for the "Start (start a single DPM system)" task. Parameters: wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ result = self.manager.session.post( self.uri + '/operations/start', wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) return result
[docs] @logged_api_call def stop(self, wait_for_completion=True, operation_timeout=None): """ Stop this CPC, using the HMC operation "Stop CPC". Authorization requirements: * Object-access permission to this CPC. * Task permission for the "Stop (stop a single DPM system)" task. Parameters: wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ result = self.manager.session.post( self.uri + '/operations/stop', wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) return result
[docs] @logged_api_call def import_profiles(self, profile_area, wait_for_completion=True, operation_timeout=None): """ Import activation profiles and/or system activity profiles for this CPC from the SE hard drive into the CPC using the HMC operation "Import Profiles". This operation is not permitted when the CPC is in DPM mode. Authorization requirements: * Object-access permission to this CPC. * Task permission for the "CIM Actions ExportSettingsData" task. Parameters: profile_area (int): The numbered hard drive area (1-4) from which the profiles are imported. wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ body = {'profile-area': profile_area} result = self.manager.session.post( self.uri + '/operations/import-profiles', body, wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) return result
[docs] @logged_api_call def export_profiles(self, profile_area, wait_for_completion=True, operation_timeout=None): """ Export activation profiles and/or system activity profiles from this CPC to the SE hard drive using the HMC operation "Export Profiles". This operation is not permitted when the CPC is in DPM mode. Authorization requirements: * Object-access permission to this CPC. * Task permission for the "CIM Actions ExportSettingsData" task. Parameters: profile_area (int): The numbered hard drive area (1-4) to which the profiles are exported. Any existing data is overwritten. wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ body = {'profile-area': profile_area} result = self.manager.session.post( self.uri + '/operations/export-profiles', body, wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) return result
[docs] @logged_api_call def get_wwpns(self, partitions): """ Return the WWPNs of the host ports (of the :term:`HBAs <HBA>`) of the specified :term:`Partitions <Partition>` of this CPC. This method performs the HMC operation "Export WWPN List". Authorization requirements: * Object-access permission to this CPC. * Object-access permission to the Partitions designated by the "partitions" parameter. * Task permission for the "Export WWPNs" task. Parameters: partitions (:term:`iterable` of :class:`~zhmcclient.Partition`): :term:`Partitions <Partition>` to be used. Returns: A list of items for each WWPN, where each item is a dict with the following keys: * 'partition-name' (string): Name of the :term:`Partition`. * 'adapter-id' (string): ID of the :term:`FCP Adapter`. * 'device-number' (string): Virtual device number of the :term:`HBA`. * 'wwpn' (string): WWPN of the HBA. Raises: :exc:`~zhmcclient.HTTPError`: See the HTTP status and reason codes of operation "Export WWPN List" in the :term:`HMC API` book. :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ body = {'partitions': [p.uri for p in partitions]} result = self.manager.session.post(self._uri + '/operations/' 'export-port-names-list', body=body) # Parse the returned comma-separated string for each WWPN into a dict: wwpn_list = [] dict_keys = ('partition-name', 'adapter-id', 'device-number', 'wwpn') for wwpn_item in result['wwpn-list']: dict_values = wwpn_item.split(',') wwpn_list.append(dict(zip(dict_keys, dict_values))) return wwpn_list
[docs] @logged_api_call def get_free_crypto_domains(self, crypto_adapters=None): """ Return a list of crypto domains that are free for usage on a list of crypto adapters in this CPC. A crypto domain is considered free for usage if it is not assigned to any defined partition of this CPC in access mode 'control-usage' on any of the specified crypto adapters. For this test, all currently defined partitions of this CPC are checked, regardless of whether or not they are active. This ensures that a crypto domain that is found to be free for usage can be assigned to a partition for 'control-usage' access to the specified crypto adapters, without causing a crypto domain conflict when activating that partition. Note that a similar notion of free domains does not exist for access mode 'control', because a crypto domain on a crypto adapter can be in control access by multiple active partitions. This method requires the CPC to be in DPM mode. **Example:** .. code-block:: text crypto domains adapters 0 1 2 3 +---+---+---+---+ c1 |A,c|a,c| | C | +---+---+---+---+ c2 |b,c|B,c| B | C | +---+---+---+---+ In this example, the CPC has two crypto adapters c1 and c2. For simplicity of the example, we assume these crypto adapters support only 4 crypto domains. Partition A uses only adapter c1 and has domain 0 in 'control-usage' access (indicated by an upper case letter 'A' in the corresponding cell) and has domain 1 in 'control' access (indicated by a lower case letter 'a' in the corresponding cell). Partition B uses only adapter c2 and has domain 0 in 'control' access and domains 1 and 2 in 'control-usage' access. Partition C uses both adapters, and has domains 0 and 1 in 'control' access and domain 3 in 'control-usage' access. The domains free for usage in this example are shown in the following table, for each combination of crypto adapters to be investigated: =============== ====================== crypto_adapters domains free for usage =============== ====================== c1 1, 2 c2 0 c1, c2 (empty list) =============== ====================== **Experimental:** This method has been added in v0.14.0 and is currently considered experimental. Its interface may change incompatibly. Once the interface remains stable, this experimental marker will be removed. Authorization requirements: * Object-access permission to this CPC. * Object-access permission to all of its Partitions. * Object-access permission to all of its crypto Adapters. Parameters: crypto_adapters (:term:`iterable` of :class:`~zhmcclient.Adapter`): The crypto :term:`Adapters <Adapter>` to be investigated. `None` means to investigate all crypto adapters of this CPC. Returns: A sorted list of domain index numbers (integers) of the crypto domains that are free for usage on the specified crypto adapters. Returns `None`, if ``crypto_adapters`` was an empty list or if ``crypto_adapters`` was `None` and the CPC has no crypto adapters. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ if crypto_adapters is None: crypto_adapters = self.adapters.findall(type='crypto') if not crypto_adapters: # No crypto adapters were specified or defaulted. return None # We determine the maximum number of crypto domains independently # of the partitions, because (1) it is possible that no partition # has a crypto configuration and (2) further down we want the inner # loop to be on the crypto adapters because accessing them multiple # times does not drive additional HMC operations. max_domains = None # maximum number of domains across all adapters for ca in crypto_adapters: if max_domains is None: max_domains = ca.maximum_crypto_domains else: max_domains = min(ca.maximum_crypto_domains, max_domains) used_domains = set() # Crypto domains used in control-usage mode partitions = self.partitions.list(full_properties=True) for partition in partitions: crypto_config = partition.get_property('crypto-configuration') if crypto_config: adapter_uris = crypto_config['crypto-adapter-uris'] domain_configs = crypto_config['crypto-domain-configurations'] for ca in crypto_adapters: if ca.uri in adapter_uris: used_adapter_domains = list() for dc in domain_configs: if dc['access-mode'] == 'control-usage': used_adapter_domains.append(dc['domain-index']) used_domains.update(used_adapter_domains) all_domains = set(range(0, max_domains)) free_domains = all_domains - used_domains return sorted(list(free_domains))
[docs] @logged_api_call def set_power_save(self, power_saving, wait_for_completion=True, operation_timeout=None): """ Set the power save setting of this CPC. The current power save setting in effect for a CPC is described in the "cpc-power-saving" property of the CPC. This method performs the HMC operation "Set CPC Power Save". It requires that the feature "Automate/advanced management suite" (FC 0020) is installed and enabled, and fails otherwise. This method will also fail if the CPC is under group control. Whether a CPC currently allows this method is described in the "cpc-power-save-allowed" property of the CPC. Authorization requirements: * Object-access permission to this CPC. * Task permission for the "Power Save" task. Parameters: power_saving (:term:`string`): The new power save setting, with the possible values: * "high-performance" - The power consumption and performance of the CPC are not reduced. This is the default setting. * "low-power" - Low power consumption for all components of the CPC enabled for power saving. * "custom" - Components may have their own settings changed individually. No component settings are actually changed when this mode is entered. wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError`: See the HTTP status and reason codes of operation "Set CPC Power Save" in the :term:`HMC API` book. :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ body = {'power-saving': power_saving} result = self.manager.session.post( self.uri + '/operations/set-cpc-power-save', body, wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) if wait_for_completion: # The HMC API book does not document what the result data of the # completed job is. It turns out that the completed job has this # dictionary as its result data: # {'message': 'Operation executed successfully'} # We transform that to None. return None return result
[docs] @logged_api_call def set_power_capping(self, power_capping_state, power_cap=None, wait_for_completion=True, operation_timeout=None): """ Set the power capping settings of this CPC. The power capping settings of a CPC define whether or not the power consumption of the CPC is limited and if so, what the limit is. Use this method to limit the peak power consumption of a CPC, or to remove a power consumption limit for a CPC. The current power capping settings in effect for a CPC are described in the "cpc-power-capping-state" and "cpc-power-cap-current" properties of the CPC. This method performs the HMC operation "Set CPC Power Capping". It requires that the feature "Automate/advanced management suite" (FC 0020) is installed and enabled, and fails otherwise. This method will also fail if the CPC is under group control. Whether a CPC currently allows this method is described in the "cpc-power-cap-allowed" property of the CPC. Authorization requirements: * Object-access permission to this CPC. * Task permission for the "Power Capping" task. Parameters: power_capping_state (:term:`string`): The power capping state to be set, with the possible values: * "disabled" - The power cap of the CPC is not set and the peak power consumption is not limited. This is the default setting. * "enabled" - The peak power consumption of the CPC is limited to the specified power cap value. * "custom" - Individually configure the components for power capping. No component settings are actually changed when this mode is entered. power_cap (:term:`integer`): The power cap value to be set, as a power consumption in Watt. This parameter is required not to be `None` if `power_capping_state="enabled"`. The specified value must be between the values of the CPC properties "cpc-power-cap-minimum" and "cpc-power-cap-maximum". wait_for_completion (bool): Boolean controlling whether this method should wait for completion of the requested asynchronous HMC operation, as follows: * If `True`, this method will wait for completion of the asynchronous job performing the operation. * If `False`, this method will return immediately once the HMC has accepted the request to perform the operation. operation_timeout (:term:`number`): Timeout in seconds, for waiting for completion of the asynchronous job performing the operation. The special value 0 means that no timeout is set. `None` means that the default async operation timeout of the session is used. If the timeout expires when `wait_for_completion=True`, a :exc:`~zhmcclient.OperationTimeout` is raised. Returns: `None` or :class:`~zhmcclient.Job`: If `wait_for_completion` is `True`, returns `None`. If `wait_for_completion` is `False`, returns a :class:`~zhmcclient.Job` object representing the asynchronously executing job on the HMC. Raises: :exc:`~zhmcclient.HTTPError`: See the HTTP status and reason codes of operation "Set CPC Power Save" in the :term:`HMC API` book. :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` :exc:`~zhmcclient.OperationTimeout`: The timeout expired while waiting for completion of the operation. """ body = {'power-capping-state': power_capping_state} if power_cap is not None: body['power-cap-current'] = power_cap result = self.manager.session.post( self.uri + '/operations/set-cpc-power-capping', body, wait_for_completion=wait_for_completion, operation_timeout=operation_timeout) if wait_for_completion: # The HMC API book does not document what the result data of the # completed job is. Just in case there is similar behavior to the # "Set CPC Power Save" operation, we transform that to None. # TODO: Verify job result of a completed "Set CPC Power Capping". return None return result
[docs] @logged_api_call def get_energy_management_properties(self): """ Return the energy management properties of the CPC. The returned energy management properties are a subset of the properties of the CPC resource, and are also available as normal properties of the CPC resource. In so far, there is no new data provided by this method. However, because only a subset of the properties is returned, this method is faster than retrieving the complete set of CPC properties (e.g. via :meth:`~zhmcclient.BaseResource.pull_full_properties`). This method performs the HMC operation "Get CPC Energy Management Data", and returns only the energy management properties for this CPC from the operation result. Note that in non-ensemble mode of a CPC, the HMC operation result will only contain data for the CPC alone. It requires that the feature "Automate/advanced management suite" (FC 0020) is installed and enabled, and returns empty values for most properties, otherwise. Authorization requirements: * Object-access permission to this CPC. Returns: dict: A dictionary of properties of the CPC that are related to energy management. For details, see section "Energy management related additional properties" in the data model for the CPC resource in the :term:`HMC API` book. Raises: :exc:`~zhmcclient.HTTPError`: See the HTTP status and reason codes of operation "Get CPC Energy Management Data" in the :term:`HMC API` book. :exc:`~zhmcclient.ParseError`: Also raised by this method when the JSON response could be parsed but contains inconsistent data. :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ result = self.manager.session.get(self.uri + '/energy-management-data') em_list = result['objects'] if len(em_list) != 1: uris = [em_obj['object-uri'] for em_obj in em_list] raise ParseError("Energy management data returned for no resource " "or for more than one resource: %r" % uris) em_cpc_obj = em_list[0] if em_cpc_obj['object-uri'] != self.uri: raise ParseError("Energy management data returned for an " "unexpected resource: %r" % em_cpc_obj['object-uri']) if em_cpc_obj['error-occurred']: raise ParseError("Errors occurred when retrieving energy " "management data for CPC. Operation result: %r" % result) cpc_props = em_cpc_obj['properties'] return cpc_props
[docs] @logged_api_call def list_associated_storage_groups( self, full_properties=False, filter_args=None): """ Return the :term:`storage groups <storage group>` that are associated to this CPC. If the CPC does not support the "dpm-storage-management" feature, or does not have it enabled, an empty list is returned. Storage groups for which the authenticated user does not have object-access permission are not included. Authorization requirements: * Object-access permission to any storage groups to be included in the result. Parameters: full_properties (bool): Controls that the full set of resource properties for each returned storage group is being retrieved, vs. only the following short set: "object-uri", "cpc-uri", "name", "fulfillment-state", and "type". filter_args (dict): Filter arguments that narrow the list of returned resources to those that match the specified filter arguments. For details, see :ref:`Filtering`. `None` causes no filtering to happen. The 'cpc-uri' property is automatically added to the filter arguments and must not be specified in this parameter. Returns: : A list of :class:`~zhmcclient.StorageGroup` objects. Raises: ValueError: The filter_args parameter specifies the 'cpc-uri' property :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ if filter_args is None: filter_args = {} else: filter_args = filter_args.copy() if 'cpc-uri' in filter_args: raise ValueError( "The filter_args parameter specifies the 'cpc-uri' property " "with value: %s" % filter_args['cpc-uri']) filter_args['cpc-uri'] = self.uri sg_list = self.manager.console.storage_groups.list( full_properties, filter_args) return sg_list
[docs] @logged_api_call def validate_lun_path(self, host_wwpn, host_port, wwpn, lun): """ Validate if an FCP storage volume on an actual storage subsystem is reachable from this CPC, through a specified host port and using a specified host WWPN. This method performs the "Validate LUN Path" HMC operation. If the volume is reachable, the method returns. If the volume is not reachable (and no other errors occur), an :exc:`~zhmcclient.HTTPError` is raised, and its :attr:`~zhmcclient.HTTPError.reason` property indicates the reason as follows: * 484: Target WWPN cannot be reached. * 485: Target WWPN can be reached, but LUN cannot be reached. The CPC must have the "dpm-storage-management" feature enabled. Parameters: host_wwpn (:term:`string`): World wide port name (WWPN) of the host (CPC), as a hexadecimal number of up to 16 characters in any lexical case. This may be the WWPN of the physical storage port, or a WWPN of a virtual HBA. In any case, it must be the kind of WWPN that is used for zoning and LUN masking in the SAN. host_port (:class:`~zhmcclient.Port`): Storage port on the CPC that will be used for validating reachability. wwpn (:term:`string`): World wide port name (WWPN) of the FCP storage subsystem containing the storage volume, as a hexadecimal number of up to 16 characters in any lexical case. lun (:term:`string`): Logical Unit Number (LUN) of the storage volume within its FCP storage subsystem, as a hexadecimal number of up to 16 characters in any lexical case. Authorization requirements: * Object-access permission to the storage group owning this storage volume. * Task permission to the "Configure Storage - Storage Administrator" task. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ # The operation requires exactly 16 characters in lower case host_wwpn_16 = format(int(host_wwpn, 16), '016x') wwpn_16 = format(int(wwpn, 16), '016x') lun_16 = format(int(lun, 16), '016x') body = { 'host-world-wide-port-name': host_wwpn_16, 'adapter-port-uri': host_port.uri, 'target-world-wide-port-name': wwpn_16, 'logical-unit-number': lun_16, } self.manager.session.post( self.uri + '/operations/validate-lun-path', body=body)
[docs] @logged_api_call def add_temporary_capacity( self, record_id, software_model=None, processor_info=None, test=False, force=False): """ Add temporary processors to the CPC or increase temporary model capacity of the CPC. This method performs the "Add Temporary Capacity" HMC operation. If the request would exceed the processor capacity that is installed on the CPC or the limits of the capacity record, the operation will fail, unless the `force` parameter is `True`. Parameters: record_id (:term:`string`): The ID of the capacity record to be used for any updates of the processor capacity. software_model (:term:`string`): The name of the software model to be activated for the CPC. This must be one of the software models defined within the specified capacity record. The software model implies the number of general purpose processors that will be active once the operation succeeds. If `None`, the software model and the number of general purpose processors of the CPC will remain unchanged. processor_info (dict): The number of specialty processors to be added to the CPC. If `None`, the number of specialty processors of the CPC will remain unchanged. Each item in the dictionary identifies the number of one type of specialty processor. The key of the item must be a string specifying the type of specialty processor ('aap', 'cbp', 'icf', 'ifl', 'iip', 'sap'), and the value of the item must be an integer specifying the number of processors of that type to be added. If an item for a type of specialty processor is not provided, or if the value of the item is `None`, the number of specialty processors of that type will remain unchanged. test (bool): Indicates whether test (`True`) or real (`False`) resources should be activated. Test resources are automatically deactivated after 24h. force (bool): `True` indicates that the operation should proceed if not enough processors are available. `True` is permitted only for CBU, CPE and loaner capacity records. Authorization requirements: * Object-access permission to the CPC. * Task permission to the "Perform Model Conversion" task. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ body = { 'record-id': record_id, 'force': force, 'test': test, } if software_model: body['software-model'] = software_model if processor_info: pi = [] for ptype, pvalue in processor_info.items(): pi_item = { 'processor-type': ptype, } if pvalue is not None: pi_item['num-processor-steps'] = pvalue pi.append(pi_item) body['processor-info'] = pi self.manager.session.post( self.uri + '/operations/add-temp-capacity', body=body)
[docs] @logged_api_call def remove_temporary_capacity( self, record_id, software_model=None, processor_info=None): """ Remove temporary processors from the CPC or decrease temporary model capacity of the CPC. This method performs the "Remove Temporary Capacity" HMC operation. You can only remove activated resources for the specific offering. You cannot remove dedicated engines or the last processor of a processor type. If you remove resources back to the base configuration, the capacity record activation is completed. That is, if you remove the last temporary processor, your capacity record is deactivated. For a CBU and On/Off CoD record, to add resources again, you must use another :meth:`add_temporary_capacity` operation. For an On/Off CoD test or CPE record, once the record is deactivated, it is no longer available for use. You can then delete the record. After removal of the resources, the capacity record remains as an installed record. If you want a record deleted, you must manually delete the record on the "Installed Records" page in the HMC GUI. Parameters: record_id (:term:`string`): The ID of the capacity record to be used for any updates of the processor capacity. software_model (:term:`string`): The name of the software model to be activated for the CPC. This must be one of the software models defined within the specified capacity record. The software model implies the number of general purpose processors that will be active once the operation succeeds. If `None`, the software model and the number of general purpose processors of the CPC will remain unchanged. processor_info (dict): The number of specialty processors to be removed from the CPC. If `None`, the number of specialty processors of the CPC will remain unchanged. Each item in the dictionary identifies the number of one type of specialty processor. The key of the item must be a string specifying the type of specialty processor ('aap', 'cbp', 'icf', 'ifl', 'iip', 'sap'), and the value of the item must be an integer specifying the number of processors of that type to be removed. If an item for a type of specialty processor is not provided, or if the value of the item is `None`, the number of specialty processors of that type will remain unchanged. Authorization requirements: * Object-access permission to the CPC. * Task permission to the "Perform Model Conversion" task. Raises: :exc:`~zhmcclient.HTTPError` :exc:`~zhmcclient.ParseError` :exc:`~zhmcclient.AuthError` :exc:`~zhmcclient.ConnectionError` """ body = { 'record-id': record_id, } if software_model: body['software-model'] = software_model if processor_info: pi = [] for ptype, pvalue in processor_info.items(): pi_item = { 'processor-type': ptype, } if pvalue is not None: pi_item['num-processor-steps'] = pvalue pi.append(pi_item) body['processor-info'] = pi self.manager.session.post( self.uri + '/operations/remove-temp-capacity', body=body)